story of isaac newton(appleuniversal law of gravitation)
13 Jul 2007 16:29:20 IST
story of isaac newton(appleuniversal law of gravitation)
Engineering Entrance
,
JEE Main
,
JEE Main & Advanced
,
Physics
,
Mechanics
,
academic
Sir Isaac Newton: The
Universal Law of Gravitation
What Really Happened with the Apple?
Probably the more correct version of the story is that Newton, upon observing an apple fall from a tree, began to think along the following lines: The apple is accelerated, since its velocity changes from zero as it is hanging on the tree and moves toward the ground. Thus, by Newton's 2nd Law there must be a force that acts on the apple to cause this acceleration. Let's call this force "gravity", and the associated acceleration the "accleration due to gravity". Then imagine the apple tree is twice as high. Again, we expect the apple to be accelerated toward the ground, so this suggests that this force that we call gravity reaches to the top of the tallest apple tree.Sir Isaac's Most Excellent Idea
Now came Newton's truly brilliant insight: if the force of gravity reaches to the top of the highest tree, might it not reach even further; in particular, might it not reach all the way to the orbit of the Moon! Then, the orbit of the Moon about the Earth could be a consequence of the gravitational force, because the acceleration due to gravity could change the velocity of the Moon in just such a way that it followed an orbit around the earth.This can be illustrated with the thought experiment shown in the following figure. Suppose we fire a cannon horizontally from a high mountain; the projectile will eventually fall to earth, as indicated by the shortest trajectory in the figure, because of the gravitational force directed toward the center of the Earth and the associated acceleration. (Remember that an acceleration is a change in velocity and that velocity is a vector, so it has both a magnitude and a direction. Thus, an acceleration occurs if either or both the magnitude and the direction of the velocity change.)But as we increase the muzzle velocity for our imaginary cannon, the projectile will travel further and further before returning to earth. Finally, Newton reasoned that if the cannon projected the cannon ball with exactly the right velocity, the projectile would travel completely around the Earth, always falling in the gravitational field but never reaching the Earth, which is curving away at the same rate that the projectile falls. That is, the cannon ball would have been put into orbit around the Earth. Newton concluded that the orbit of the Moon was of exactly the same nature: the Moon continuously "fell" in its path around the Earth because of the acceleration due to gravity, thus producing its orbit.
By such reasoning, Newton came to the conclusion that any two objects in the Universe exert gravitational attraction on each other, with the force having a universal form:The constant of proportionality G is known as the universal gravitational constant. It is termed a "universal constant" because it is thought to be the same at all places and all times, and thus universally characterizes the intrinsic strength of the gravitational force.
The Center of Mass for a Binary System
If you think about it a moment, it may seem a little strange that in Kepler's Laws the Sun is fixed at a point in space and the planet revolves around it. Why is the Sun privileged? Kepler had rather mystical ideas about the Sun, endowing it with almost godlike qualities that justified its special place. However Newton, largely as a corollary of his 3rd Law, demonstrated that the situation actually was more symmetrical than Kepler imagined and that the Sun does not occupy a privileged postion; in the process he modified Kepler's 3rd Law. Consider the diagram shown to the right. We may define a point called the center of mass between two objects through the equationswhere R is the total separation between the centers of the two objects. The center of mass is familiar to anyone who has ever played on a seesaw. The fulcrum point at which the seesaw will exactly balance two people sitting on either end is the center of mass for the two persons sitting on the seesaw.
Here is a Center of Mass Calculator that will help you make and visualize calculations concerning the center of mass. (Caution: this applet is written under Java 1.1, which is only supported by the most recent browsers. It should work on Windows systems under Netscape 4.06 or the most recent version of Internet Explorer 4.0, but may not yet work on Mac or Unix systems or earlier Windows browsers.)
Newton's Modification of Kepler's Third Law
Because for every action there is an equal and opposite reaction, Newton realized that in the planetSun system the planet does not orbit around a stationary Sun. Instead, Newton proposed that both the planet and the Sun orbited around the common center of mass for the planetSun system. He then modified Kepler's 3rd Law to read,where P is the planetary orbital period and the other quantities have the meanings described above, with the Sun as one mass and the planet as the other mass. (As in the earlier discussion of Kepler's 3rd Law, this form of the equation assumes that masses are measured in solar masses, times in Earth years, and distances in astronomical units.) Notice the symmetry of this equation: since the masses are added on the left side and the distances are added on the right side, it doesn't matter whether the Sun is labeled with 1 and the planet with 2, or viceversa. One obtains the same result in either case.Now notice what happens in Newton's new equation if one of the masses (either 1 or 2; remember the symmetry) is very large compared with the other. In particular, suppose the Sun is labeled as mass 1, and its mass is much larger than the mass for any of the planets. Then the sum of the two masses is always approximately equal to the mass of the Sun, and if we take ratios of Kepler's 3rd Law for two different planets the masses cancel from the ratio and we are left with the original form of Kepler's 3rd Law:Thus Kepler's 3rd Law is approximately valid because the Sun is much more massive than any of the planets and therefore Newton's correction is small. The data Kepler had access to were not good enough to show this small effect. However, detailed observations made after Kepler show that Newton's modified form of Kepler's 3rd Law is in better accord with the data than Kepler's original form.
Two Limiting Cases
We can gain further insight by considering the position of the center of mass in two limits. First consider the example just addressed, where one mass is much larger than the other. Then, we see that the center of mass for the system essentially concides with the center of the massive object:This is the situation in the Solar System: the Sun is so massive compared with any of the planets that the center of mass for a Sunplanet pair is always very near the center of the Sun. Thus, for all practical purposes the Sun IS almost (but not quite) motionless at the center of mass for the system, as Kepler originally thought.However, now consider the other limiting case where the two masses are equal to each other. Then it is easy to see that the center of mass lies equidistant from the two masses and if they are gravitationally bound to each other, each mass orbits the common center of mass for the system lying midway between them:This situation occurs commonly with binary stars (two stars bound gravitationally to each other so that they revolve around their common center of mass). In many binary star systems the masses of the two stars are similar and Newton's correction to Kepler's 3rd Law is very large.
Here is a Java applet that implements Newton's modified form of Kepler's 3rd law for two objects (planets or stars) revolving around their common center of mass. By making one mass much larger than the other in this interactive animation you can illustrate the ideas discussed above and recover Kepler's original form of his 3rd Law where a less massive object appears to revolve around a massive object fixed at one focus of an ellipse.
These limiting cases for the location of the center of mass are perhaps familiar from our aforementioned playground experience. If persons of equal weight are on a seesaw, the fulcrum must be placed in the middle to balance, but if one person weighs much more than the other person, the fulcrum must be placed close to the heavier person to achieve balance.
Here is a Kepler's Laws Calculator that allows you to make simple calculations for periods, separations, and masses for Keplers' laws as modified by Newton (see subsequent section) to include the effect of the center of mass. (Caution: this applet is written under Java 1.1, which is only supported by the most recent browsers. It should work on Windows systems under Netscape 4.06 or the most recent version of Internet Explorer 4.0, but may not yet work on Mac or Unix systems or earlier Windows browsers.)
Weight and the Gravitational Force
We have seen that in the Universal Law of Gravitation the crucial quantity is mass. In popular language mass and weight are often used to mean the same thing; in reality they are related but quite different things. What we commonly call weight is really just the gravitational force exerted on an object of a certain mass. We can illustrate by choosing the Earth as one of the two masses in the previous illustration of the Law of Gravitation:Thus, the weight of an object of mass m at the surface of the Earth is obtained by multiplying the mass m by the acceleration due to gravity, g, at the surface of the Earth. The acceleration due to gravity is approximately the product of the universal gravitational constant G and the mass of the Earth M, divided by the radius of the Earth, r, squared. (We assume the Earth to be spherical and neglect the radius of the object relative to the radius of the Earth in this discussion.) The measured gravitational acceleration at the Earth's surface is found to be about 980 cm/second/second.Mass and Weight
Mass is a measure of how much material is in an object, but weight is a measure of the gravitational force exerted on that material in a gravitational field; thus, mass and weight are proportional to each other, with the acceleration due to gravity as the proportionality constant. It follows that mass is constant for an object (actually this is not quite true, but we will save that surprise for our later discussion of the Relativity Theory), but weight depends on the location of the object. For example, if we transported the preceding object of mass m to the surface of the Moon, the gravitational acceleration would change because the radius and mass of the Moon both differ from those of the Earth. Thus, our object has mass m both on the surface of the Earth and on the surface of the Moon, but it will weigh much less on the surface of the Moon because the gravitational acceleration there is a factor of 6 less than at the surface of the EarthComments (2)
rahul sharma
New kid on the Block
Joined: 13 Jul 2007 16:53:48 IST
Posts: 6
13 Jul 2007 16:56:26 IST
Like
0 people liked this
hey man good work
Free Sign Up!
Take a Free Test  
Scholarship offer: Score above 85% in any of the Free test and get 10% discount on 1 year Test Series  


Preparing for JEE?
Kickstart your preparation with new improved study material  Books & Online Test Series for JEE 2014/ 2015
@ INR 5,443/
For Quick Info
Vertical Limit
Top Contributors
All Time This Month Last Week 1.  Bipin Dubey

2.  Himanshu

3.  Hari Shankar

4.  edison

5.  Sagar Saxena

6.  Yagyadutt Mishr..
