Home » Ask & Discuss » Physics. » Mechanics « Back to Discussion

Mechanics

New kid on the Block

Joined:	17 Aug 2007
Post:	18

22 Sep 2007 19:22:46 IST

0 People liked this

420

BRIEF CHART OF MOMENTS OF INERTIA

None

A Chart of Common Moments of Inertia

Printer Friendly Version

For linear, or translational, motion an object's resistance to a change in its state of motion is called its inertia and is measured in terms of its mass, in kg. When a rigid body is rotated, its resistance to a change in its state or rate of rotation is called its rotational inertia, which is measured in terms of its moment of inertia, in kg m². This resistance has a two-fold property:

the amount of mass present in the object, and
the distribution of that mass about the chosen axis of rotation.

In general, the formula for a single object's moment of inertia is I_cm = kmr² where k is a constant whose value varies from 0 to 1. Different positions of the axis result in different moments of inertia for the same object; the further the mass is distributed from the axis of rotation, the greater the value of its moment of inertia.

That is, the smaller the coefficient of mr², the easier it is to accelerate the object. That is, spheres accelerate easier than cylinders, which accelerate easier than thin rings or hoops. Since an object's moment of inertia increases as its mass is moved further from its axis of rotation, hoops and rings would represent the greater inertia since all of their mass is concentrated at a constant distance, r, from the center of rotation.

Below is a series of diagrams illustrating how the moment of inertia for the same object can change with the placement of the axis of rotation. This is not an all inclusive list, but it is a "most used" list.

solid sphere I = 2/5 MR²	thin-walled sphere I = 2/3 MR²


thin rod (perpendicular at end) I = 1/3 ML²	thin rod (perpendicular at center) I = 1/12 ML²


solid cylinder (about central axis) I = 1/2 MR²	thin-walled cylinder/hoop/ring (about central axis) I = MR²	thick-walled cylinder (about central axis) I = 1/2 M(R₁² + R₂²)


solid cylinder (perpendicular to central axis) I = 1/4 MR² + 1/12 ML²	thin-walled cylinder (perpendicular to central axis) I = 1/2 MR² + 1/12 ML²

Share this article on:

Comments (1)

nitin singh

New kid on the Block

Joined: 17 Aug 2007

Posts: 18

23 Sep 2007 15:44:52 IST

Like 0 people liked this

rate me guys...........

Quick Reply

Reply

	Some HTML allowed.
	Keep your comments above the belt or risk having them deleted.
	Signup for a avatar to have your pictures show up by your comment
	If Members see a thread that violates the Posting Rules, bring it to the attention of the Moderator Team